SKU Code: 0034509

Hoto 12V Brushless Cordless Electric Drill

Powerful brushless motor with lithium battery.

In stock   

In Stock - Birkirkara & Zejtun

Quantity

       

€89.90   

Offers available in Stores only

€80.91

Description

Sleek and Modern
The screwless design on the scratch and stain resistant PC-ABS brings sleekness and minimalism into play.
 
Powerful Brushless Motor
Its durable brushless motor allows stable operation by balancing force and efficiency. 30nm maximum torque, 1400rpm maximum rotation.
 
Digital Torque Adjustment
Precise digital torque control with the plus (+) and minus (-) signs. 30 power levels to regulate from for an efficient job. Real-time control of working speed and easy dual mode shifting between Pulse Mode and Custom Mode.
 
Drilling and Screwing
A tool that does it all. One gadget to drill or screw. Toggle between the two functions with a simple slide switch.
 
18 Piece Kit
10 x S2 steel long drill bits, 4 x woodworking drills, and 4 x metal drills for multiple work scenarios.
 
Battery Charging
2000mAh lithium battery. USB-C charging port.

Specifications

Technical Specifications
Security torx: T9H/T10H/T15H/T20H/T25H
Rated voltage: 12V⎓
Hex: H3/H4/H5/H6
No-load drilling speed
  • 0–1400rpm (electric drill speed)
  • 0–370rpm (screwing speed)
Slotted: SL4/SL6
Y bit: Y1
Charging specifications: 5V⎓3A; 9V⎓1.5A
Tri-wing: 2.3
Charging time: 120–180min
Square: S0/S1
Drill bit type
  • Metal twist drill bit 3/4/5/6
  • Wood drill bit 4/5/6/7
U bit: U2.6
Extension rod: 60mm
 
Package contents
1 x Electric drill 
1 x Storage pouch 
1 x Adaptor 
1 x Charging cable 
1 x Bit storage container 
8 x Drill bit 
24 x Screwdriving bit
1 x Extension rod 
1 x User manual 
 
Notes
* The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.
* No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.
* Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.
* Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.
* Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.
* The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.
* The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.
* The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.
* The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.
* The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.
* The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.
* The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.

Warranty and Returns Policy

SKU Code: 0034509

Hoto 12V Brushless Cordless Electric Drill

€89.90   

Offers available in Stores only

€80.91

Powerful brushless motor with lithium battery.

Quantity

       

In stock   

In Stock - Birkirkara & Zejtun

Description

Sleek and Modern
The screwless design on the scratch and stain resistant PC-ABS brings sleekness and minimalism into play.
 
Powerful Brushless Motor
Its durable brushless motor allows stable operation by balancing force and efficiency. 30nm maximum torque, 1400rpm maximum rotation.
 
Digital Torque Adjustment
Precise digital torque control with the plus (+) and minus (-) signs. 30 power levels to regulate from for an efficient job. Real-time control of working speed and easy dual mode shifting between Pulse Mode and Custom Mode.
 
Drilling and Screwing
A tool that does it all. One gadget to drill or screw. Toggle between the two functions with a simple slide switch.
 
18 Piece Kit
10 x S2 steel long drill bits, 4 x woodworking drills, and 4 x metal drills for multiple work scenarios.
 
Battery Charging
2000mAh lithium battery. USB-C charging port.

Specifications

Technical Specifications
Security torx: T9H/T10H/T15H/T20H/T25H
Rated voltage: 12V⎓
Hex: H3/H4/H5/H6
No-load drilling speed
  • 0–1400rpm (electric drill speed)
  • 0–370rpm (screwing speed)
Slotted: SL4/SL6
Y bit: Y1
Charging specifications: 5V⎓3A; 9V⎓1.5A
Tri-wing: 2.3
Charging time: 120–180min
Square: S0/S1
Drill bit type
  • Metal twist drill bit 3/4/5/6
  • Wood drill bit 4/5/6/7
U bit: U2.6
Extension rod: 60mm
 
Package contents
1 x Electric drill 
1 x Storage pouch 
1 x Adaptor 
1 x Charging cable 
1 x Bit storage container 
8 x Drill bit 
24 x Screwdriving bit
1 x Extension rod 
1 x User manual 
 
Notes
* The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.
* No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.
* Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.
* Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.
* Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.
* The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.
* The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.
* The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.
* The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.
* The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.
* The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.
* The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.

Warranty and Returns Policy